SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
#1
|
||||
|
||||
flywheel resurfacing
does anyone know for the 6spd flywheel if the mounting points for the pressure plate need to be brought down too?
shop said it would be different by 16thou
__________________
Tranny goes in, tranny comes out, tranny goes in.....AW ****, tranny comes out.... |
#2
|
||||
|
||||
Re: flywheel resurfacing
If that all .016. I don't think that is going to hurt you. That's only a little
More than an RCH.
__________________
When I was in school I sucked in sports. Then I found out I can buy trophies and now I am great at everything. |
#3
|
|||
|
|||
Re: flywheel resurfacing
Had mine resurfaced, it's no issue. As long as the nominal thickness of the flywheel is within tolerance it will work correctly.
|
#4
|
||||
|
||||
Re: flywheel resurfacing
does anyone have the tolerance or spec? cant find it.
__________________
Tranny goes in, tranny comes out, tranny goes in.....AW ****, tranny comes out.... |
#5
|
||||
|
||||
Re: flywheel resurfacing
fyi, according to exedy, an sti flywheel is 14.6mm +/- 0.1mm
__________________
Tranny goes in, tranny comes out, tranny goes in.....AW ****, tranny comes out.... |
|
|