SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
#31
|
|||
|
|||
I was only refering the problem below:
Quote:
Kuoh....I had the same problem you did. Seatbelt would get jammed everytime and a nice hit would break it loose. I ripped apart the car and it turned out the wire cable that drives the seatbelt back and forth on the track became slightly un-twisted which caused the seatbelt to jam. I re-twisted it with a pair of pliers and re-assemled and it has worked flawlessly for over a year now. Might want to give it a try. |
#32
|
|||
|
|||
One of these days I'm going to convert the whole system to a manual type! That way, I don't have to keep reminding my passenger to put the lap belt on!
Ali
__________________
If it ain't broken it, doesn't have enough features!!! '92 SVX LSL '03 4Runner '96 FZJ80 Landcruiser '90 Mercedes 300E |
#33
|
|||
|
|||
Fixed
As a final follow up, I purchased a used control module from a member here about a month ago. I finally installed it tonight. Success! The belt is working normally now. Thanks for everyone's help. Bill Z
|
#34
|
||||
|
||||
Can you please give some detail where the module is and how to replace it? My seat belts are disconnected, and when I plug them back on the light and sound indicator goes off. Thanks.
|
#35
|
|||
|
|||
Module is in the trunk under the rear wiper. Remove the trunk plastic and its a silver box with two very large wire looms comming out of it.
|
|
|