11:1 CR Built Motor

[Cam]

Up for sale is the engine from my car. Look in my thread history for the thread on its build. I believe it is titled "11:1 Engine Build".

Here is a list of all the things that were done to it.

11:1 CR ECUtune Pistons
256 intake/ 256 exhaust ECUtune camshafts
Thermal coated pistons, and main bearings (supplied by ECUtune)
ECUtune rod bearings
All machine work was performed at Action Machine in Shoreline, WA.
370cc SR20 injectors
Z32 MAF
Everything on engine, EXCEPT alternator, AC compressor, PS pump, TPS, Crank sensor, Cam sensors and crank pulley are BRAND NEW.
New bolts in engine, new brackets, new timing covers, new pulleys, water pump, REBUILT oil pump. New vacuum hoses (blue silicone).

Machine work includes, Bore and 2-step hone of cylinders, light polish on crank, re-surfacing the heads, rebuilding of valve-train, balancing of entire rotating assembly (cannot recall how far it was balanced but it is upwareds of 10k rpm).

I am only asking 4k for the engine, and if you want it will stay in the car and you can come haul the whole thing away!

The car runs, but it idles like crap, since it runs so rich. You could maybe try to contact Mike at ECUtune to see if you could work out some better software (if you take it to a gas analyzer he may be able to adjust software according to the results), or you could slap a hydra on her. Either way, the engine is solid, and runs well in upper RPM's.

Contact me via PM with any questions. Don't be afraid to make an offer, I will entertain any and all at this point.