Question on a 5 speed part??

95greensvx · #1 12-16-2008, 09:46 PM

I don't know what this part is called:
[IMG]

[/IMG]

a shifter pivot bushing perhaps? The bottom part of what is circled is missing from my car, I was driving down the road and all of a sudden my shifter became incredibly loose and this ended up being the culprit.

Any help as to what it is called so I can order one would be greatly appreciated. Thanks in advance.

95greensvx · #2 12-17-2008, 10:59 AM

I just had a message sent to me saying that they can't see the picture but it's showing up fine for me when I go to view the thread. Well what I'm missing is the part at the base that the ball at the end of the shifter assembly lever connects into to. I am assuming it's some sort of pivot bushing for the shifter as it keeps tight shifting when you shift between gears and now my shifter is just loose. I will get a picture of my car's shifter this weekend.

TomsSVX · #3 12-17-2008, 12:29 PM

what year/model did your donor shifter come from?? A picture on the linkage would be good too. I can help you find the right part(s) to replace it

Tom

95greensvx · #4 12-17-2008, 01:37 PM

The transmission is from a 2004 WRX. I purchased the car with the swap already performed so I am assuming that the shifter also came from a 2004 WRX. I'll obtain some pictures this weekend. Thanks.

NikFu S. · #5 12-17-2008, 02:27 PM

Possible answer: Part 35035, "stay" bushing.

My shifter developed a similar problem over the weekend.

TomsSVX · #6 12-17-2008, 04:42 PM

If the bushing is missing or damaged that is one thing. It is likely that the snap-ring has come off on the underside.

Tom

95greensvx · #7 12-17-2008, 06:19 PM

Quote:

Originally Posted by NikFu S.

Possible answer: Part 35035, "stay" bushing.

My shifter developed a similar problem over the weekend.

Where would be the best place to order this from?