SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
#1
|
|||
|
|||
need help on removal/installation of main power window switch
How do I remove and install the main power window switch on driver's door?
|
#2
|
||||
|
||||
Re: need help on removal/installation of main power window switch
Remove the 2 screws near the hinge on the door, then the 2 inside the door slot, and the 1 underneath a plastic cover under the handle. After that unplug 2 wires and unscrew the unit from the door card.
__________________
Seth 94' Barcelona Red w/ Tricoat black 2-tone AWD Ls -Sold Mods:AWD conversion/4.44 swap by Budfreak, Custom red interior lights, Custom Satin black dash, Power mode switch, Cold air intake, Permecool tranny filter,Sony xplode 10" sub, Sony xplode 1000w amp, Blitz in-line driver, DDM Tuning 6000k HID's, New paint job/body work by me, 97' Grill, QC shift kit, 17'' MB Motoring rims, 15&20 min mod, front & rear urethane swaybar bushings, Custom fiberglass sub box, Custom red led a/c control unit, perrin lightweight crank pulley, Black wrinkle finish powdercoated intake manifold w/ clear hoses , 02' outback heated/power black leather seats Soon to come:Fiberglass hood, upholster ALL suede to black leather Past subies: 92' Pearl White/black top LS-L-SOLD 96' Legacy Outback-TOTALED 99' Legacy Outback Limited 30th anniversary edition-TOTALED 98' Forester L -Totaled Other toys: 99' Forester S -WRX brake upgrade, soon an 04 wrx motor swap 06' B9 Tribeca-Stock 1982' Yamaha xj650 Maxim Mods: work in progress |
#3
|
|||
|
|||
Re: need help on removal/installation of main power window switch
Once you've removed the aforementioned screws, pull the door panel outward from the bottom to unsnap the fasteners, then lift straight up. Hardest part of the job is getting the door lock button aligned for re-installation. Use a magnetic screwdriver to hold the smallish screw that's beneath the plastic cover underneath the door handle.
dcb |
#4
|
|||
|
|||
Re: need help on removal/installation of main power window switch
be care ful not to disassemble the door lock switch because, there is alot of small parts that make it work.\ i had mine apart and i was lucky to get it together
. |
|
|