SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
#1
|
|||
|
|||
power seat removal
wonder if anyone can help (or has done this)
is there any way a power seat (drivers, RHD) can be moved back so I can get to the frame bolts - car is a parts car and have no power - or can I get it to move back if I plug in a power source somewhere cheers bruce |
#2
|
||||
|
||||
Re: power seat removal
A quick use of the search function would give you a faster answer regarding this.
Theres a small bolt that can be removed to disengage the seat from the motor. |
#3
|
||||
|
||||
Re: power seat removal
Here is a link to the thread with instructions for removing the seat See the photo for the overlooked bolt that must be removed.
http://www.subaru-svx.net/forum/show...eat#post619283 ,
__________________
. Subaru Ambassador 1996 Polo Green LSi #216..138,100 miles...SOLD JFICX8659TH100216.....Date of Manufacture: November 16, 1995..... Fuji Heavy Industries..Ōta North Plant....Ōta City,. Gunma Prefecture, Japan In-Service Date: January 2, 1997 "The Pristine Green Polo Machine” First Polo Green on the Network First Clear front turn signals, JDM Alcyone hood emblem, rear panel, and BOXER engine cover on the Network (US) (2000) First 5000K HID factory fog lights (2007) First SVX JDM BBS wheels on a USDM SVX (2013) HID lighting (5000K) for headlight and H3 fog lights, PIAA SuperExtreme 120W high beams, rebuilt EG33 longblock, Cometic head gaskets, Phase II flexplate, AMR aluminum radiator with custom silicone hoses, 160A high-output alternator in aluminum-ceramic coated case, new design alternator wiring upgrade v.4, rare factory headlight protectors, refinished JDM BBS mesh aluminum wheels and custom, polished billet aluminum new hex center caps, LED grille mod, R1 Concepts high-carbon cryo slotted rotors, Akebono ceramic pads, Goodridge S/S braided brake lines, Smallcar Stage 1 shift kit, ThermalTech aluminum/ceramic-coated valve covers, Energy Suspension urethane front & rear swaybar bushings, Bontrager22 rear swaybar with QS Components Chromoly Teflon/Kevlar endlinks, "$15.00/5 minute" suspension mod. Hella Supertone horns, Custom stainless steel exhaust system with 2" headpipes, Magnaflow cats, AeroTurbine AR25 resonator /AWD "Bullet" muffler. R.I.P. 2010 Subaru Outback Limited 2.5 CVT...338,000 miles. Totaled by a 1,300 lb. COW March 4, 2016 2014 Hyundai Avante Limited ...178,000 miles. Actually quieter and smoother than the Outback 2007 Mazda Miata MX-5 PRHT...102,000 miles. Plenty of parts, service and windshields. 4th Registered Network member —2/21/2001 My NEW locker..I...My Email..I..Wikipedia/SVX . . |
#4
|
|||
|
|||
Re: power seat removal
Bruce,
I dummied up a replacement plug that I hardwired to a battery. Works fine. M *Dumb question, but is the car too far stripped to just hookup a battery? Seat doesn't need ignition power to work, just battery hooked up. |
#5
|
|||
|
|||
Re: power seat removal
Quote:
Seat was so far forward, trouble was getting hand in there to remove the plastic covers, then used 2 socket extensions and a uni and got the front bolts out even found 50 cents in change for my trouble! thanks for the pic svxcess, the seats are so low and being so far forward, i could not see the 2nd bolt, but the picture definitely helped cheers bruce |
Thread Tools | |
Display Modes | |
|
|