The Subaru SVX World Network   SVX Network Forums
Live Chat!
SVX or Subaru Links
Old Lockers
Photo Post
How-To Documents
Message Archive
SVX Shop Search
IRC users:

Go Back   The Subaru SVX World Network > SVX Main Forums > Technical Q & A

Reply
 
Thread Tools Display Modes
  #1  
Old 03-21-2012, 01:33 PM
tiv0's Avatar
tiv0 tiv0 is offline
svxless
 
Join Date: Oct 2007
Location: Omaha, NE
Posts: 629
Registered SVX
Rebuilt half shafts

Does anyone know of a reliable source for rebuilt half shafts?

My two front outer CV boots are torn and I'm looking to replace the entire front half shaft assemblies as opposed to just the boots themselves since you have to remove the axles anyway.

I've done some searching on these forums and have read many reviews of people recommending Raxles.com. I gave them a call and spoke with Marty, he claims they don't do anything for SVXs. I've also read that auto parts stores like AutoZone and AdvanceAutoParts sell rebuilt assemblies but from the reviews I've read on their websites the quality of parts they use are far from good.

Any suggestions would be much appreciated.
__________________
Trevor
Avondale, AZ

1992 LS-L Liquid Silver 126k "BXR6" Sold 3/23/13
1992 LS-L Claret 178k totaled 10/26/09

1987 BMW 325is

60% of the time it works, every time
Reply With Quote
  #2  
Old 03-21-2012, 01:56 PM
Wikedjuggalo's Avatar
Wikedjuggalo Wikedjuggalo is offline
Rebuilding
 
Join Date: Aug 2007
Location: Salem, Oregon
Posts: 2,419
Registered SVX
Re: Rebuilt half shafts

Quote:
Originally Posted by tiv0 View Post
Does anyone know of a reliable source for rebuilt half shafts?

My two front outer CV boots are torn and I'm looking to replace the entire front half shaft assemblies as opposed to just the boots themselves since you have to remove the axles anyway.

I've done some searching on these forums and have read many reviews of people recommending Raxles.com. I gave them a call and spoke with Marty, he claims they don't do anything for SVXs. I've also read that auto parts stores like AutoZone and AdvanceAutoParts sell rebuilt assemblies but from the reviews I've read on their websites the quality of parts they use are far from good.

Any suggestions would be much appreciated.
I just replaced both fronts. Autozone ones I got (FWD had less deposit, matched right up no difference that I could see or confirm). I don't see an issue with it and I can provide comparison photos. Good choice on replacing the CV complete not just boots. I got mine for 60 dollars plus 25 dollar core deposit. I am in the process of doing a proper write up since the one in the How-To's was not very clear.
__________________
1994 SVX L - FWD Barcelona Red 190K miles ~ SOLD

1994 SVX LS - 5spd AWD Emerald Green 202k miles PWR Radiator, HID 5000k, New paint job with issues, 17" STI BBS wheels, converted to 5spd AWD from FWD. Purchased from SVXyGirl 2/20/09 -- Undergoing complete rebuild
1993 Justy 4wd 5door- Teal of sorts , beater.
2008 OBXT Newport Pearl 65k miles
Reply With Quote
  #3  
Old 03-21-2012, 02:18 PM
tiv0's Avatar
tiv0 tiv0 is offline
svxless
 
Join Date: Oct 2007
Location: Omaha, NE
Posts: 629
Registered SVX
Re: Rebuilt half shafts

Any comments on the quality of the boot rubber? The reviews on their site imply they are made of cheap rubber than ends up ripping again in a few month.
__________________
Trevor
Avondale, AZ

1992 LS-L Liquid Silver 126k "BXR6" Sold 3/23/13
1992 LS-L Claret 178k totaled 10/26/09

1987 BMW 325is

60% of the time it works, every time
Reply With Quote
  #4  
Old 03-21-2012, 02:34 PM
92snowmachine 92snowmachine is offline
Registered User
 
Join Date: Dec 2009
Location: Denver, Colordado
Posts: 828
Registered SVX
Re: Rebuilt half shafts

i bought mine at napa. i think they were around $90 a piece with the core deposit (kept the old ones). they have neoprene boots and a good warranty. it seems autozone is hit or miss with axles because like most retailers (including napa) they don't actually rebuild them but rely on their vendors. since autozone insists on being the cheapest price in town they also seek out rebuilders who are the same.
Reply With Quote
  #5  
Old 03-21-2012, 04:38 PM
Green1995SVX's Avatar
Green1995SVX Green1995SVX is offline
Registered User
 
Join Date: Jul 2008
Location: Meadville, PA
Posts: 2,664
Send a message via AIM to Green1995SVX Send a message via Yahoo to Green1995SVX
Registered SVX Classic SVX
Re: Rebuilt half shafts

I have the 100% new chinese ones on my svx, and hate them. They have made noise since day one, and both of my front wheel bearings failed within 1000 miles of installing them. I think the area beyond the bearing flange to the threaded portion of the end is too long, causing there to not be a firm seat with the bearing, allowing movement.

I'm going back to OEM before I drive my car again.
__________________
2009 Volvo C70 T5
2008 Volvo S80 V8
2006 Range Rover Sport
2001 Audi S8
Reply With Quote
  #6  
Old 03-21-2012, 05:03 PM
Wikedjuggalo's Avatar
Wikedjuggalo Wikedjuggalo is offline
Rebuilding
 
Join Date: Aug 2007
Location: Salem, Oregon
Posts: 2,419
Registered SVX
Re: Rebuilt half shafts

Quote:
Originally Posted by tiv0 View Post
Any comments on the quality of the boot rubber? The reviews on their site imply they are made of cheap rubber than ends up ripping again in a few month.
I didn't seem any difference. They have a lifetime warranty (whatever that covers) and honestly I am fine with them. I could not find a place (besides subaru) that had new axles.

*Correction* Seems Advance Auto (none around here so didn't shop there) has new "GPS" ones but apparently they are horrid? I am reading the reviews, I guess these are the ones you got Mike?

But if you dare brave it you can get both axles shipped to your place for 118 no core and also free shipping (using MA100 code).

I really didn't see a difference in the rubber, felt the same and looked about the same.
New Axle

Bad axle

bad boot again

I had the inner boots wear not the outer.
Attached Images
File Type: jpg IMG_20120319_171354.jpg (156.9 KB, 181 views)
File Type: jpg IMG_20120309_215736.jpg (153.6 KB, 175 views)
File Type: jpg IMG_20120319_173955.jpg (136.2 KB, 188 views)
__________________
1994 SVX L - FWD Barcelona Red 190K miles ~ SOLD

1994 SVX LS - 5spd AWD Emerald Green 202k miles PWR Radiator, HID 5000k, New paint job with issues, 17" STI BBS wheels, converted to 5spd AWD from FWD. Purchased from SVXyGirl 2/20/09 -- Undergoing complete rebuild
1993 Justy 4wd 5door- Teal of sorts , beater.
2008 OBXT Newport Pearl 65k miles

Last edited by Wikedjuggalo; 03-21-2012 at 05:15 PM. Reason: photos!
Reply With Quote
  #7  
Old 04-04-2012, 03:16 PM
tiv0's Avatar
tiv0 tiv0 is offline
svxless
 
Join Date: Oct 2007
Location: Omaha, NE
Posts: 629
Registered SVX
Re: Rebuilt half shafts

Just to wrap up this thread...

I ended up buying rebuild half shafts from Carquest Auto Parts. They were ~$70 apiece with a lifetime warranty. Drove 1400 miles on them after installation and experienced no issues whatsoever.
__________________
Trevor
Avondale, AZ

1992 LS-L Liquid Silver 126k "BXR6" Sold 3/23/13
1992 LS-L Claret 178k totaled 10/26/09

1987 BMW 325is

60% of the time it works, every time
Reply With Quote
  #8  
Old 04-04-2012, 04:30 PM
svxcess's Avatar
svxcess svxcess is offline
Super Moderator
Alcyone Gold Contributor
 
Join Date: Feb 2001
Location: Westminster, MD
Posts: 6,747
Significant Technical Input Registered SVX Classic SVX
Re: Rebuilt half shafts

Evey axle I have ever bought for the SVX I have gotten from http://www.raxles.com/

A lifetime warranty and never had a failure or problem with any component.

The same from any member who I have recommended them to. Their commitment to excellence and service is in the same league as Maniac Electric for alternators
__________________
.
Subaru Ambassador

1996 Polo Green LSi #216..138,100 miles...SOLD

JFICX8659TH100216.....Date of Manufacture: November 16, 1995.....
Fuji Heavy Industries..Ōta North Plant....Ōta City,. Gunma Prefecture, Japan

In-Service Date: January 2, 1997



"The Pristine Green Polo Machine”
First Polo Green on the Network
First Clear front turn signals, JDM Alcyone hood emblem, rear panel, and BOXER engine cover on the Network (US) (2000)
First 5000K HID factory fog lights (2007)
First SVX JDM BBS wheels on a USDM SVX (2013)

HID lighting (5000K) for headlight and H3 fog lights, PIAA SuperExtreme 120W high beams, rebuilt EG33 longblock, Cometic head gaskets, Phase II flexplate, AMR aluminum radiator with custom silicone hoses, 160A high-output alternator in aluminum-ceramic coated case, new design alternator wiring upgrade v.4, rare factory headlight protectors, refinished JDM BBS mesh aluminum wheels and custom, polished billet aluminum new hex center caps, LED grille mod, R1 Concepts high-carbon cryo slotted rotors, Akebono ceramic pads, Goodridge S/S braided brake lines, Smallcar Stage 1 shift kit, ThermalTech aluminum/ceramic-coated valve covers, Energy Suspension urethane front & rear swaybar bushings, Bontrager22 rear swaybar with QS Components Chromoly Teflon/Kevlar endlinks, "$15.00/5 minute" suspension mod. Hella Supertone horns, Custom stainless steel exhaust system with 2" headpipes, Magnaflow cats, AeroTurbine AR25 resonator /AWD "Bullet" muffler.


R.I.P. 2010 Subaru Outback Limited 2.5 CVT...338,000 miles. Totaled by a 1,300 lb. COW March 4, 2016

2014 Hyundai Avante Limited ...178,000 miles. Actually quieter and smoother than the Outback

2007 Mazda Miata MX-5 PRHT...102,000 miles.
Plenty of parts, service and windshields.


4th Registered Network member —2/21/2001

My NEW locker..I...My Email..I..Wikipedia/SVX .

.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 11:36 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
© 2001-2015 SVX World Network
(208)-906-1122