SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
#1
|
||||
|
||||
reversed intake manifold
i was wondering, can the intake manifold on the eg33 be reversed like the 4cylinder blocks?
__________________
Tranny goes in, tranny comes out, tranny goes in.....AW ****, tranny comes out.... |
#2
|
||||
|
||||
Re: reversed intake manifold
Not and fit under the hood...as the rear of the intake is much higher then the front
__________________
Huck Subaru Ambassador 92 SVX LS-Tour Magnaflow Exhaust, 5-Spd-AWD 88 XT6 AWD 5-Speed "Bride of FrankenWedge" 15 Impreza Premium Sedan 15 Crosstrek XV 5-Speed My 5-Speed "How-To" Write-up 1976 Pontiac Firebird Formula Current Count of Subaru's Owned.... "70" |
#3
|
||||
|
||||
Re: reversed intake manifold
Even with a custom manifold made in a reverse form, your inlet (either the throttle body - preferred - or a duct leading to one) is going to interfere with the hood or say... your alternator.
__________________
Disclaimer: The above post is on the internet. |
#4
|
||||
|
||||
Re: reversed intake manifold
You mean like this one? I am not sure if they just reversed the manifold or if they cut out and then flipped and re-welded in the center?
__________________
1992 LSL ebony pearl 170k - Thank you Ron Mummert Reading Box of Wine Car ----------------------------------- 1992 SVX LSL 5-Speed Sold at 180K 2019 1995 SVX Lsi Polo Sold at 118K 2007 |
#5
|
||||
|
||||
Re: reversed intake manifold
I think it was cut and flipped. Nice that it fits in other cars and not ours..
__________________
1992 Pearl White LS-L "Ruslana" #4946 - 180k on body, 95k on engine. Mods: ECU bead crush, 15 min mod, 20 min mod, drilled/slotted rotors & Axxis ceramic brakes, SS lines, 17" Evoke F1 wheels, XS-HF137 Sony Xplod speakers, 6000k HID's (lows & fogs), resistor mod, 1½" Sleek Spoiler mod, custom exhaust by svxfiles, '02 WRX aluminum racing radiator by svxfiles, Summit Racing 400# x 300# springs w/ Koni's by svxfiles, ClassGlass fiberglass hood /w scoop, Nevin's rear sway bar, '97 grille, phenolic spacers, custom LED interior lighting, custom paint. †"War doesn't determine who is right, only who is left"† Work to be done: Tinted windows, clear/LED tail lights, tailbar mod, "Power Mode" mod, Supertone horns, clear corners & headlight lenses, 2 pc splitters or custom bumper, Alcyone side skirts, TruSpeed Stage III SVX Intake, Hydra, 4.44 tranny swap, JDM auto folding side mirrors, engine rebuild, super charger, STi seats, bone leather interior /w SVX emblem, dash overhaul, SVX decals, paint (stock color). Total cost?: 22k At least it's going down..
|
#6
|
||||
|
||||
Re: reversed intake manifold
Just have Class Glass fab up a Ram Air hood like on a WS6 Firebird. (God that would look horrible)
__________________
1992 LSL ebony pearl 170k - Thank you Ron Mummert Reading Box of Wine Car ----------------------------------- 1992 SVX LSL 5-Speed Sold at 180K 2019 1995 SVX Lsi Polo Sold at 118K 2007 |
#7
|
||||
|
||||
Re: reversed intake manifold
It doesn't. Hit up "TUN EZ33" for some pics of the custom snout.
__________________
Disclaimer: The above post is on the internet. |
#8
|
||||
|
||||
Re: reversed intake manifold
nice to know our engines are 1000hp rated
__________________
Tranny goes in, tranny comes out, tranny goes in.....AW ****, tranny comes out.... |
#9
|
||||
|
||||
Re: reversed intake manifold
It doesn't say how long they'll see that 1000hp, right?
__________________
Disclaimer: The above post is on the internet. |
#10
|
||||
|
||||
Re: reversed intake manifold
nope but at least we know that there is room to put the car to 500 without having something catastrophic happen.
i'm only aiming for 300whp
__________________
Tranny goes in, tranny comes out, tranny goes in.....AW ****, tranny comes out.... |
#11
|
||||
|
||||
Re: reversed intake manifold
My goal is a staggering 800hp for no specific reason.
__________________
1992 Pearl White LS-L "Ruslana" #4946 - 180k on body, 95k on engine. Mods: ECU bead crush, 15 min mod, 20 min mod, drilled/slotted rotors & Axxis ceramic brakes, SS lines, 17" Evoke F1 wheels, XS-HF137 Sony Xplod speakers, 6000k HID's (lows & fogs), resistor mod, 1½" Sleek Spoiler mod, custom exhaust by svxfiles, '02 WRX aluminum racing radiator by svxfiles, Summit Racing 400# x 300# springs w/ Koni's by svxfiles, ClassGlass fiberglass hood /w scoop, Nevin's rear sway bar, '97 grille, phenolic spacers, custom LED interior lighting, custom paint. †"War doesn't determine who is right, only who is left"† Work to be done: Tinted windows, clear/LED tail lights, tailbar mod, "Power Mode" mod, Supertone horns, clear corners & headlight lenses, 2 pc splitters or custom bumper, Alcyone side skirts, TruSpeed Stage III SVX Intake, Hydra, 4.44 tranny swap, JDM auto folding side mirrors, engine rebuild, super charger, STi seats, bone leather interior /w SVX emblem, dash overhaul, SVX decals, paint (stock color). Total cost?: 22k At least it's going down..
|
#12
|
||||
|
||||
Re: reversed intake manifold
lol smartass
just enough to keep up or beat a stock Sti while only paying a 10th of the cost of one :P
__________________
Tranny goes in, tranny comes out, tranny goes in.....AW ****, tranny comes out.... |
#13
|
||||
|
||||
Re: reversed intake manifold
Lol I don't blame you. That and the SVX is really fun to drive.
__________________
1992 Pearl White LS-L "Ruslana" #4946 - 180k on body, 95k on engine. Mods: ECU bead crush, 15 min mod, 20 min mod, drilled/slotted rotors & Axxis ceramic brakes, SS lines, 17" Evoke F1 wheels, XS-HF137 Sony Xplod speakers, 6000k HID's (lows & fogs), resistor mod, 1½" Sleek Spoiler mod, custom exhaust by svxfiles, '02 WRX aluminum racing radiator by svxfiles, Summit Racing 400# x 300# springs w/ Koni's by svxfiles, ClassGlass fiberglass hood /w scoop, Nevin's rear sway bar, '97 grille, phenolic spacers, custom LED interior lighting, custom paint. †"War doesn't determine who is right, only who is left"† Work to be done: Tinted windows, clear/LED tail lights, tailbar mod, "Power Mode" mod, Supertone horns, clear corners & headlight lenses, 2 pc splitters or custom bumper, Alcyone side skirts, TruSpeed Stage III SVX Intake, Hydra, 4.44 tranny swap, JDM auto folding side mirrors, engine rebuild, super charger, STi seats, bone leather interior /w SVX emblem, dash overhaul, SVX decals, paint (stock color). Total cost?: 22k At least it's going down..
|
Thread Tools | |
Display Modes | |
|
|