SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
#1
|
|||
|
|||
Pully??
i just wanted to know if anyone has try to put a sti(or any other type of subaru pully? on it on the SVX ???
|
#2
|
|||
|
|||
yes, there is underdrive/lightwieght pullies out there, however I am not a huge fan.
yes they can make a bit of a difference, no they won't let you beat NSX's at the stoplight drags. Ok might if its one of the worthless automatic targa models, but you know what I mean. Oh and if you are going with a manual conversion with a light flywheel, I REALLY don't advise going nuts on light crank pullies. CEL, stalls, etc will become your SVX's defining attributes. |
#3
|
||||
|
||||
I run a wrx lighted pulley on my car. It did require trimming the timing belt cover a little.
__________________
2005 Legacy GT 2002 WRX VF22, Pinks, big TMIC and turbo back 128,*** miles My WRX's Cardomain Page |
#4
|
|||
|
|||
I have a bomz pulley on my car and it fits fine. the pulley I bought was for the legacy, svx, forester, and imprezza. It basically fit 90's and up subaru
__________________
"They that can give up essential liberty to obtain a little temporary safety deserve neither liberty nor safety." Benjamin Franklin blk 92' LSL w/ average mods pics here http://s306.photobucket.com/albums/nn277/yourconfused/ Cash68: "Hmm, I wouldn't brag about beating Escorts. That's like saying you tricked a retarded person." |
#5
|
|||
|
|||
O, must have lost what I was saying there. Anyway I got that pulley off ebay for a whopping 24.99 with 4.99 s&h!
__________________
"They that can give up essential liberty to obtain a little temporary safety deserve neither liberty nor safety." Benjamin Franklin blk 92' LSL w/ average mods pics here http://s306.photobucket.com/albums/nn277/yourconfused/ Cash68: "Hmm, I wouldn't brag about beating Escorts. That's like saying you tricked a retarded person." |
#6
|
|||
|
|||
Quote:
So what about a stock 05 sti pully or a perrin??? or would it just be better to go with like a 95 -01 sti or some thing like that??? |
#7
|
|||
|
|||
Quote:
Do u have a pic of it???? I want to see how it would look and how much does it make in different on before and after? |
#8
|
|||
|
|||
The STi pulley is heavier than the WRX pulley. My STi chucked its crankpully dude to a lose crank bolt while on a road trip and got replaced by a WRX one. Thanks to that coupled with the lightwieght twinplate clutch assembly, it started to throw misfire codes like mad.
When I wieghed them the STi one was about 1/2 a pound heavier. The lightest I've seen was well under a pound for a magnesium pulley. Mind the heavy STi is something like 4lbs so.... |
#9
|
|||
|
|||
Don't quote these as exact but off of NASIOC. The WRX stock pulley is about 5lbs (NASIOC). The WRX STI pulley is about 5.5lbs (NASIOC). I have personally weighed and confirmed off of Motorsport Warehouse the SVX pulley is under 5lbs. In general the stock or aftermarket pulleys that fit on 98-01 Impreza RS, 02-07 WRX, 04-07 WRX STI maybe even other models fit the SVX. If I were you I would find a stock pulley from a SVX or if you are doing it for performance buy one from Motorsports Warehouse (www.planetsvx.com) to be sure.
Last edited by Mission; 06-07-2007 at 04:19 AM. |
#10
|
|||
|
|||
ok, those numbers sound about right, been a couple years since I've tossed them on the scale...
|
|
|