SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
#1
|
|||
|
|||
skid plate screws
Does anyone know what size screws hold the skid plate on? I'm talking about the plastic plate below that engine that makes changing the oil a pain in the butt. Mine is held on with tie wraps and I'm thinking about going back stock with screws.
|
#2
|
||||
|
||||
I cant find the actual thread size and pitch, but I do know they are the same as the fender bolts, etc. And with a 10mm head. Go to the junk yard and find just about any Subaru and pull several off the top flange of the fenders.
__________________
Prime Сasual Dating |
#3
|
||||
|
||||
Not sure about the threads here either, but my 92 has 10mm's in the front, and 12mm's for the two at the rear of the car. I think mine's weird though.. subaruparts.com has them listed under the menu body, then under cover, part #57719AA020, for $1.00 a piece there's 7 of them. Probably cheaper to get an assortment of sizes at your local hardware store though!
__________________
92 Teal 181K 4:11 trans Lightweight crank pulley Redline Shockproof Trans Cooler Viper 550 HF Alarm/Remote Start 18" Enkei Evo5's |
|
|