Parts Needed for SVXY

[LarryIII]

I need the following parts for my 1992 SVX :

1) Radiator - The stock radiator has developed a 3" long, horizontal, thin crack along the upper plastic rolled section that supports the cap. The antifreeze weeps out slowly. I cleaned it up and am going to try JB Weld this weekend.
I have one of the aluminum radiators in my basement, but that was slated for Rosie's SVX, 'Pearly'. I will use the alum. radiator as a last resort. I am looking for a good stock radiator, preferably a '94 or later.

2) Front Inner Fender Liner - The black plastic front inner fender liner on the driver's side came loose and was chewed up a bit by the wheel on my way home from work the other night. It fell off in my driveway. I could not salvage it. I would like one in fairly good condition.

3) Signal Light Assembly - This is the driver's side unit. The clear lens now has a spider crack in it. They have been repaving I-95 all spring, summer, and fall. I use this rte. to and from work. They scarify the old pavement before applying the new asphalt to improve adhesion. This creates tons of concrete/asphalt pebbles. I took the nose bra off Rosie's '94 SVX and put it on SVXY to protect the front. Last week my luck ran out. I heard the hit and when I gto to work I saw the spider crack. Man was I mad. Thank you PA DOT for another fine job.

4) Good attachment hardware for all above.


The easiest way to contact me is either thru PM on this site, or my e-mail at work: larry.singer@jacobs.com

Thanks in advance for any help on these parts.