SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
#1
|
||||
|
||||
rear bumper
i got the supports off (all 4 from inside the trunk) and all of them by the muffler... but how do most people get the ones from above the exhaust tips??? or by the wheel wells? i cant get either of those?
any help is appreciated! -drew
__________________
'96 Saab 900 turbo '95 Passat (drove the wheels off) '92 SVX Ls-L (smashed/sold) '88 Acura Legend (wheel fell off) '90 Audi 80 quattro (50mph into side of truck) '95 Saab 9000cse turbo (sold) |
#2
|
||||
|
||||
Take out the trunk trim.
The bumper is on hooks and you need 2 people to remove the bumper.
__________________
David B. SVXipedia @ SVX-IW.COM -- SVX Information Warehouse 2.0 coming...eventually! Ebony 1992 SVX LS-L 5 spd Koni/GC Stebro 187k miles RIP (Rust In Pieces) 1993 SVX 5 spd Koni/GC Stebro Polyurethane bushings still available! |
#3
|
||||
|
||||
For the ones above the exhaust tips, you will need a L-shaped screw driver or a small vise grip. In the wheel well, you will need an extension on the screwdriver.
|
Thread Tools | |
Display Modes | |
|
|