![]() |
SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
#1
|
||||
|
||||
Need Info on Brake Caliper Rebuild
Does any body have some pictures, instructions, or parts list of brake caliper rebuild? I would like to get a How-To done on this and I am looking for the information. If you have any of the above, please email or PM me and I will tell you how to get it to me. Thanks.
![]()
__________________
. Earl .... ... .... ><SVX(*> Subaru Ambassador [COLOR=”silver”]1992 Tri Color L[/COLOR] ~45K (06/91) #2430 1992 Dark Teal LS-L ~184K (05/91) #0739 1992 Claret LS-L ~196K (05/91) #0831 1992 Pearl LS-L ~103K (06/91) #1680 1992 Pearl LS-L ~151K (06/91) #2229 1992 Dark Teal LS ~150K (07/91) #3098 (parts car) 1992 White LS-L ~139K (08/92) #6913 1993 25th AE ~98K (02/93) #164 1993 25th AE ~58K (02/93) #176 1993 25th AE ~107K (02/93) #215 1993 25th AE ~162K (02/93) #223 1994 Laguna Blue Pearl LSi ~124K (1/94) #2408 1994 Laguna Blue Pearl LSi ~144K (10/93) #1484 1994 Laguna Blue Pearl LSi ~68K (10/93) #1525 1994 Barcelona Red LSi ~46K (02/94) #2624 1994 Pearl LSi ~41K (12/93) #1961 1995 Bordeaux Pearl LSi ~70K (02/95) #855 1996 Polo Green LSi ~95K (03/96) #872 1997 Bordeaux Pearl LSi ~55K (08/96) #097 2003 Brilliant Red LS1 Convertible ~29K (04/03) #8951 1999 Magnetic Red LS1 Coupe ~33K (04/99) #6420 My Email | Old Locker | New Locker | Picture of 15 of the 19 |
#2
|
||||
|
||||
PM sent.
![]() |
#3
|
||||
|
||||
I didn't get a PM from you.
![]()
__________________
. Earl .... ... .... ><SVX(*> Subaru Ambassador [COLOR=”silver”]1992 Tri Color L[/COLOR] ~45K (06/91) #2430 1992 Dark Teal LS-L ~184K (05/91) #0739 1992 Claret LS-L ~196K (05/91) #0831 1992 Pearl LS-L ~103K (06/91) #1680 1992 Pearl LS-L ~151K (06/91) #2229 1992 Dark Teal LS ~150K (07/91) #3098 (parts car) 1992 White LS-L ~139K (08/92) #6913 1993 25th AE ~98K (02/93) #164 1993 25th AE ~58K (02/93) #176 1993 25th AE ~107K (02/93) #215 1993 25th AE ~162K (02/93) #223 1994 Laguna Blue Pearl LSi ~124K (1/94) #2408 1994 Laguna Blue Pearl LSi ~144K (10/93) #1484 1994 Laguna Blue Pearl LSi ~68K (10/93) #1525 1994 Barcelona Red LSi ~46K (02/94) #2624 1994 Pearl LSi ~41K (12/93) #1961 1995 Bordeaux Pearl LSi ~70K (02/95) #855 1996 Polo Green LSi ~95K (03/96) #872 1997 Bordeaux Pearl LSi ~55K (08/96) #097 2003 Brilliant Red LS1 Convertible ~29K (04/03) #8951 1999 Magnetic Red LS1 Coupe ~33K (04/99) #6420 My Email | Old Locker | New Locker | Picture of 15 of the 19 |
#4
|
||||
|
||||
I think the difficult part is getting the piston into the rubber boot as it is a tight fit.
__________________
May your transmission live forever. SuperbVehicleXtraordinary Proud sponsor of a 1992 SVX. ![]() |
#5
|
||||
|
||||
99cent Caliper Piston shoehorn.......
hey Earl..
ive rebuilt my Calipers twice in 270k miles. They sell a caliper seal Kit..subaruparts.com.....basic process as follows; 1. remove caliper and use air compressor with rubber nozzel to force out pistons (i put a 3x folded over shop rag in caliper to absorbe pistons popping out...GO slow with air can be DANGEROUS...when pistons pop out. 2. Replace the seals, boots etc. clean and lube pins and coat inside of pots with some dot4. 3.To get the pistons back is a PITA....SOlution: Get a 99cent plastic spice bottle(w spice of ure choice and cut of BOTH ends to get a cylinder.Then cut lengthwise..(see fig. ) sorry about noob paint skills 4.Cutting lengthwise will allow u to slip the spice bottle into pot and then drop/guide in piston.....works like a charm........ 4.5 Note; put on new boots onto caliper First without pistons....then use shoehorn to stretch boot and guide piston in.... 5.Reassemble and bleed Brakes and u are good for 100k or so.... ![]() Ps while your at it u should Paint the Calipers and rotor hubs Black(high temp paint.......looks nice.....
__________________
92' Claret LSL 282,000 miles 1owner(ME) 07' Pearly WRX 40k Cobb Stage II (sold) ![]() SVX+$$$+GreaseMonkey = ![]() ![]() Last edited by StelthSvx; 07-04-2007 at 10:02 PM. |
#6
|
||||
|
||||
I actually installed the boots on to the pistons, then droped them both in together. This works fine with the front calipers only. The rear calipers have a retaining ring that needs to be installed with the boot before droping in the piston.
How come on your drawing you have the seal on the piston? The seal goes on the inside of the caliper. The groove in the piston is for the boot to hold on to. PS. I also painted the calipers while I was doing the over haul, this is the best time to do it. Last edited by dannmarr; 07-05-2007 at 03:31 AM. |
#7
|
||||
|
||||
Earl, check your email.
|
#8
|
||||
|
||||
bad memmory...
![]()
__________________
92' Claret LSL 282,000 miles 1owner(ME) 07' Pearly WRX 40k Cobb Stage II (sold) ![]() SVX+$$$+GreaseMonkey = ![]() ![]() Last edited by StelthSvx; 07-04-2007 at 10:03 PM. |
#9
|
||||
|
||||
I actually like your method. Too bad I read this after I did my calipers. The rears were difficult because the boots have to go on first and trying to hold the boots open while droping in the calipers are a PITA.
|
#10
|
||||
|
||||
Here is a break down of the front caliper parts.
|
#11
|
||||
|
||||
replace pivot pin
Quote:
nice pic Just did the seals in my front calipers not to hijack this thread but any help with a caliper rattle over gravel and small bumps The noise stops when I apply the brakes so I'm pretty sure it's the upper pivot pin on the mounting bracket lots of up and down play called the dealer and the pin is $10 and the bushing $18 If I replace the pin I should replace the bushing also How difficult is it to drive that thing out of the caliper? Never done one on any of my other subes?
__________________
92 SVX LS Pearl 94 SVX LSi Barcelona Red 82 Brat 4WD Bob |
#12
|
||||
|
||||
The caliper should slide right off the pin. It could be frozen, then you'll need to use some WD40. The top pin is screwed into the caliper bracket. It comes out with an open end wrench. The boot can be reused if it's not damaged. Use silicone on the pin when you slide the caliper back on. Make sure it's the top pin that needs replacing, it can also be the bottom screw that's not screwed in properly. Check my locker for a photo of the top pin.
Last edited by dannmarr; 07-09-2007 at 07:35 PM. |
#13
|
||||
|
||||
Here are some photos on how I replaced the boots on the pistons.
|
#14
|
||||
|
||||
Dannmarr - were you drinking, or did you just have problems with the focus?
![]() ![]() ![]() ![]()
__________________
. Earl .... ... .... ><SVX(*> Subaru Ambassador [COLOR=”silver”]1992 Tri Color L[/COLOR] ~45K (06/91) #2430 1992 Dark Teal LS-L ~184K (05/91) #0739 1992 Claret LS-L ~196K (05/91) #0831 1992 Pearl LS-L ~103K (06/91) #1680 1992 Pearl LS-L ~151K (06/91) #2229 1992 Dark Teal LS ~150K (07/91) #3098 (parts car) 1992 White LS-L ~139K (08/92) #6913 1993 25th AE ~98K (02/93) #164 1993 25th AE ~58K (02/93) #176 1993 25th AE ~107K (02/93) #215 1993 25th AE ~162K (02/93) #223 1994 Laguna Blue Pearl LSi ~124K (1/94) #2408 1994 Laguna Blue Pearl LSi ~144K (10/93) #1484 1994 Laguna Blue Pearl LSi ~68K (10/93) #1525 1994 Barcelona Red LSi ~46K (02/94) #2624 1994 Pearl LSi ~41K (12/93) #1961 1995 Bordeaux Pearl LSi ~70K (02/95) #855 1996 Polo Green LSi ~95K (03/96) #872 1997 Bordeaux Pearl LSi ~55K (08/96) #097 2003 Brilliant Red LS1 Convertible ~29K (04/03) #8951 1999 Magnetic Red LS1 Coupe ~33K (04/99) #6420 My Email | Old Locker | New Locker | Picture of 15 of the 19 |
#15
|
||||
|
||||
It looks clear to me, burp.
![]() |
![]() |
|
|