The Subaru SVX World Network   SVX Network Forums
Live Chat!
SVX or Subaru Links
Old Lockers
Photo Post
How-To Documents
Message Archive
SVX Shop Search
IRC users:

Go Back   The Subaru SVX World Network > SVX Main Forums > Technical Q & A

Reply
 
Thread Tools Display Modes
  #1  
Old 10-06-2006, 09:11 PM
drivfour drivfour is offline
Registered User
 
Join Date: Jan 2006
Location: evergreen, CO
Posts: 35
Also need tranny advice

Installed used 4.11 tranny from 2.5 Legacy-worked out bugs, ran well for 800 miles. Changed trans resistor from 130 ohms to 37 ohms and within 100 miles I
have the following issues:
In park you hear a "slowly turning shaft" sound
In R no noise until moving then the car moves rearward a few feet and a slip bang rings the driveline
in N loud clunking varying with engine speed
In D the noise goes away but there is some drive slippage

please let me know what to try- I will recheck trans fluid level, disconnect resistor then test. If that is not immediate improvement, I will adjust band.
Other suggestions?????
Thanks John
Reply With Quote
  #2  
Old 10-07-2006, 06:51 AM
genzzel genzzel is offline
Will pass gas for $$
 
Join Date: Oct 2006
Location: Clearfield, PA
Posts: 86
130 to 37 ohms??? the nomimal spec on this resistor is 12 ohms and should be a 15 ohms 25 watt resistor. Dosen't sound good with the noises and slipage.

Last edited by genzzel; 10-07-2006 at 06:53 AM.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 05:34 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
© 2001-2015 SVX World Network
(208)-906-1122