SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
#31
|
|||
|
|||
Re: Sleeve Lock Regulator Replacement with PHOTOS
Hi,
Sorry I was offline due to power being cut to prevent wild fires... I've some what hastily tried to make the clip available via https://www.shapeways.com/product/2D...onId=129957846 Let me know how you find the experience, all feedback welcome. It would be great to get people using the clip so we can find out if there are any improvements needed to increase longevity. Thanks, Ian. Last edited by svxcess; 11-03-2019 at 05:07 PM. |
#32
|
||||
|
||||
Re: Sleeve Lock Regulator Replacement with PHOTOS
The order went through smoothly.
Gene
__________________
Gene and Ben 1992 SVX LS AWD 110K - Liquid Silver 1994 SVX LSi AWD 128K - White Pearl (daily driver) 1994 SVX LSi AWD 95K - Emerald Pearl (sold) 1992 SVX LS-L AWD 115K - Dark Teal 4.44 swap (sold) |
#33
|
|||
|
|||
Re: Sleeve Lock Regulator Replacement with PHOTOS
Great, glad to hear it went well. Thanks very much for testing. Somebody else placed an order as well, hopefully that went well. I don't get to see who placed orders, just the order and number of parts.
Gene, I'll mail your original back with a couple of spares this week. Thanks for enabling the whole thing! Thanks! Ian. |
#34
|
|||
|
|||
Re: Sleeve Lock Regulator Replacement with PHOTOS
Nice work Ian. I may not need one but at least I learned about the issue and the resolution here.
__________________
If it ain't broken it, doesn't have enough features!!! '92 SVX LSL '03 4Runner '96 FZJ80 Landcruiser '90 Mercedes 300E |
#35
|
|||
|
|||
Re: Sleeve Lock Regulator Replacement with PHOTOS
For those who might want to 3D print there own (the print a temporary one while shapeways prints a nylon one), you can get the file from here:
https://www.thingiverse.com/thing:4234854 Sorry I didn't get this out sooner.... Also, any feedback from folks who've already installed one? I'm happy to iterate over the design a bit and improve it where needed. Thanks! Ian. |
#36
|
||||
|
||||
Re: Sleeve Lock Regulator Replacement with PHOTOS
Placed an order today, fingers crossed, won't ship for a while but who's going anywhere? Thank you for sharing this and going the extra mile to make this possible.
Upside?: Finally get to replace the absolutely trashed speakers. With old age comes hearing loss, was oblivious to the deteriorated condition of the speakers. Thanks again, Bruce UPDATE :6/16/20 parts arrived from Shapeways. Beautifully made. Fit perfectly. Super simple to install. Bruce
__________________
“I distrust those people who know so well what God wants them to do, because I notice it always coincides with their own desires.” Susan B. Anthony "The Dildo of Karma rarely comes lubed." -- Unknown The inventor of the doorbell did not own a dog. Last edited by blackbolt94red; 06-16-2020 at 07:40 PM. |
#37
|
||||
|
||||
Re: Sleeve Lock Regulator Replacement with PHOTOS
I printed 100 of them. I have a STL. File on Thingivers.com. Can’t print? I can send them out for $ of postage. Runs about 6 $ and I seeD u 4 or 5 at a time.
__________________
When I was in school I sucked in sports. Then I found out I can buy trophies and now I am great at everything. |
#38
|
||||
|
||||
Re: Sleeve Lock Regulator Replacement with PHOTOS
I'm looking at getting some of these from Shapeways.. works out about $10 USD ea plus shipping to New Zealand... about $50 NZD (ouch!) Have they stood the test of time?
I got some done locally but they all failed... |
#39
|
|||
|
|||
Re: Sleeve Lock Regulator Replacement with PHOTOS
Hi Ewie,
I designed the replacement part and I'm also very interested in any stories about longevity/reliability. So far there has been no reports of them breaking. The big advantage with the Shapeways version is that it is nylon (same as the factory version). The PLA plastic ones (very common for 3D printers, and what I use when printing test versions) don't hold up in the long term. ABS might be a better option than PLA, but I don't have that much experience with it (it stinks when you print it, so I stay away from it), but nylon has better properties for an application like this than either PLA or ABS. The Shapeways quality is really good, much better than most hobbyists (including myself) are able to print at home. I would really appreciate any information on failed parts, would you be able to take some pictures of the failed part(s) and share them with me? It would really help to have some data on how they are failing, and how future versions could be made to last longer. Really sorry about the shipping costs, I wish Shapeways would just open a branch in each country and eliminate international shipping costs. I do have a couple of nylon ones from shapeways I could try to mail to you. But geez a quick check online shows crazy shipping prices to New Zealand (like $65 is the cheapest!). The USPS has a VHS box (yes, for a video tape) rate for $39.60 (delivery time: 6 - 10 business days), and USPS also has First-Class Package International which might be $20 (delivery time: eventually, maybe - I guess this might be on boat with many stops). But there is also a pandemic on and I don't really want to stand in line at the post office.... maybe there is a drop off or non-standing-in-line-with-other-people way I can look into. Cheers, Ian. |
#40
|
|||
|
|||
Re: Sleeve Lock Regulator Replacement with PHOTOS
Sorry just re-read your post "$10USD is $50 NZ" (!!!!).
None of the shipping options I found are as cheap as shapeways. Sorry the exchange rate suck. |
#41
|
|||
|
|||
Re: Sleeve Lock Regulator Replacement with PHOTOS
$1 nzd = $.7188 usd
__________________
1997 Bordeaux Pearl, 2006 Alfa Romeo Brera 3.2 6MT, 2010 Mercedes Benz GLK350, 2018 BMW 640i GT Xdrive, 2012 Moto Guzzi Norge GT 8V, Last edited by Blacky; 01-01-2021 at 04:50 AM. |
#42
|
|||
|
|||
Re: Sleeve Lock Regulator Replacement with PHOTOS
Thanks Blacky, I guess I shouldn't post when tired.
Then ignore my second post. How many folks with SVX live in New Zealand? Might be worth taking care of everybody in one order (then split shipping). Otherwise I could try to mail some via a cheap route (maybe after the pandemic). Happy new year, Ian. |
|
|