SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
#1
|
|||
|
|||
first gear only
My 92 with 68 k will not shift out of first gear and there is no slippage of clutches. Is this a low line pressure cause, solenoid "A" or solinoid 1, or vehicle speed sensor ? First and reverse are only operable gears. need input.
|
#2
|
|||
|
|||
Re: first gear only
When my SHO did that it was one of the planetary gears broke.
|
#3
|
|||
|
|||
Re: first gear only
Quote:
Harvey.
__________________
One Arm Bloke. Tell it like it is! 95 Lsi. Bordeaux Pearl, Aust. RHD.149,000Kls Subaru BBS wheels. 97 Liberty GX Auto sedan. 320,000Kls. 04 Liberty 30R Auto Premium. 92.000kls. |
#4
|
||||
|
||||
Re: first gear only
is the car FWD or AWD? does the speedo work? if its FWD it is most likely the speed sensor, but if it is AWD than the rear speed sensor would send the signal for it to shift, (unless the FWD fuse is in) but the speedo will not work.
|
#5
|
|||
|
|||
Re: first gear only
Yes the tach is working. When the engine is started the power light does blink for about 5 seconds . I will try a self trans diagnosis and see what comes up. I do have access to all the shop manuals. Thank-you for input. Steve
|
#6
|
||||
|
||||
Re: first gear only
Any codes?.. If it is an AWD car, disconnect #2 speedo sensor (at the front dif ) drive it and see if it sets a speedo sensor code, if so, that means the TCU and all is functioning and will not tell you otherwise that the problem is in the trans and rebuilt it must be.
|
#7
|
|||
|
|||
Re: first gear only
Count the blinks. These are you tcu codes. The fsm should be able to tell you what code it is, or you could do a search here.
__________________
Cam '92 Ls-L Dark Teal 11:1 CR ECUTUNE pistons ECUTUNE .256 duration intake/exhaust cams ECUTUNE STAGE 2AV1 ECU Z32 MAF/SR20DET injectors Balanced & Blueprinted |
|
|