SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
#10
|
||||
|
||||
Re: 11:1 CR Race/Street Engine build
after numerous emails and phone calls, I cannot find the proper size shims anywhere...
I had the thought of trimming down the valve stems to create a larger gap to use thicker shims. I would rather not do that in all honesty. SO.... I have ordered some Yamaha motorcycle shims. 25mm in diamter and 2.30mm in thickness. I will send these out to be cut down to the individual thicknesses they need to be.... Anyone else doing this... Highly suggest trying to take 1mm out of the base circle Tom |
|
|