Many Parts available (will continually update)

[1986nate]

BRAND NEW pair of control arms-$400 shipped
BRAND NEW full set of strut mounts, front and rear-$300 shipped
Stebro muffler with resonator delete catback- $750 OBO-sale pending
Stock turn signals (currently 2 sets in great shape)- $55 for a pair or $30 each
stock headlights- $70 pair or $40 each.
Rust free doors. Many sets, many colors, some in usable shape and others will need some straightening of minor dents/dings. Much better than dealing with rust. message me for prices/pics
Running engines as well as resealed/rebuilt engines available (also have harness,ecu,etc packages available for swaps)
Transmissions-stock and 4.44 autos as well as 5 spds and kits
Windshields WITH molding intact-$750 negotiable-message me for tints available
Tons of stock wheels
85k mile set of front control arms- $100/side
85k mile Left front caliper-$65/side (Right is sold)
85k mile Power Steering Pump w/reservoir-$50
85k mile A/c Compressor-$100
85k mile Alternator-$50
85k mile Auto Starter-$50
Pass side grey visors-$35
Used Motor mounts-$25 each
Tons of coils-$30 a piece ($35 for a "white" connector aka the long one) or $100 for a set of 6. Guaranteed to work. I also have a set with just 86k miles for $150 (will not break up set)

Much, much more, including full parts cars yet. If you need anything, feel free to ask.

[Tim]

Passenger side rear quarter

[1986nate]

Originally Posted by Tim

Passenger side rear quarter

I'll get working on it. Finally have time to get to this kind of stuff. (provided I have enough southern cars)

[theflystyle]

What kinda condition is the exhaust in?

[1986nate]

Originally Posted by theflystyle

What kinda condition is the exhaust in?

It's in good, used shape. It's still on the car at the moment. Has minimal surface rust spots on the midpipe, none on the muffler.

I also have a catback with an 80 series flowmasters done properly.

[Tim]

Originally Posted by 1986nate

I'll get working on it. Finally have time to get to this kind of stuff. (provided I have enough southern cars)

Thank you sir. Keep me posted

[huck369]

Coming to the Dragon Meet?
I could use an underseat drawer.....

[scoobymal]

P M sent

[Blacky]

Rust free Southern rear sub-frame? The one on my '97 is baaaaad.
Could eventually cause the demise of the car.

[1986nate]

Originally Posted by Blacky

Rust free Southern rear sub-frame? The one on my '97 is baaaaad.
Could eventually cause the demise of the car.

Yes, And I also have a potential Canada trip coming up which will help out greatly with shipping costs. I'll shoot you a PM

Originally Posted by huck369

Coming to the Dragon Meet?
I could use an underseat drawer.....

I'm not going to make it unfortunately. Too much going on with getting fired. lol
But I do have the tray. $25 shipped seem fair? (grey one I'm assuming?)

Originally Posted by scoobymal

P M sent

I'll send a response shortly.

[1986nate]

18x8" All 4 wheels are in as good as condition as this one shown. There were tires mounted for one week and then removed.
Stock SVX lug nuts will work perfectly with these.
$1400 OBO

[lsupcar]

Do you have any good a/c control modules?
Thanks.
Bill Z

[theflystyle]

Do you have a good condition master window switch?

[lightspeedrobot]

i need the whole heater core unit with all the sensors etc attached.
probably the HVAC control unit too....


btw those bbs are saaaweeeet!

[1986nate]

Originally Posted by lightspeedrobot

i need the whole heater core unit with all the sensors etc attached.
probably the HVAC control unit too....


btw those bbs are saaaweeeet!

I should have everything you need. I may have to pull a fresh heater core unit to make sure it's got everything still attached, but definitely have it as well as the HVAC controls. PM me a pic of your dash style (unless it's 92 or the matte grey as 92's are all the same and the matte grey is matte grey lol)

And thanks. I love em, but I'll be going with much wider wheels on the turbo SVX. I picked up this set in trade awhile back.


flystyle-sent you a PM.