![]() |
SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
#1
|
|||
|
|||
1992 AWD trans failure
Hey today while I was driving on the freeway at 80mph my transmission made a loud snap/clunking noise and shuddered and started to slow down like when you downshift in a manual. When I pulled the car over and parked it, it would no longer switch into reverse, although it will switch into drive, I think it won't shift past 2nd gear.
The car won't even roll backwards in Neutral, but it will roll forward. When I try to switch into reverse I hear a loud whining noise, it sounds like a gear is grinding against something. I have been searching for hours and I haven't found a single thing that matches what my problem is. I pulled the transmission codes and it came up with 24 for duty solenoid C, and 11 for duty solenoid A. I tried unplugging the resistor for behind the battery but it didn't change anything. I checked the diff and trans fluid and they both smell burnt. At this point I'd just like to try to figure out how to get it to roll backwards so I can get it home and start working on replacing the transmission. I would greatly appreciate any input from anyone. Last edited by Saxman; 09-01-2013 at 07:52 PM. |
|
|