jdm svx trans, will it work?

[oab_au]

Just to fill in every one to what is going on. Alex had gear box trouble; he desired to fit a 4.44 gearbox and final drive. Budfreak set every thing up and sent it to Alex in Norway. Alex takes it to his garage to do the work. There they find that his original box has no speed sensor in the front diff like the one sent.

It appears that Norway has the real VTD, the same as UK, AUST, NZ, with both speed sensors on the gearbox output shafts. As the TCU in his car is set up to use the inductive speed sensors and cannot support the US front diff mounted Hall effect speed sensor. I have advised him to swap the front speed sensor out of his original box into the US box, as we did when ~JJ~, Jake fitted a JDM box to his Aust car.

He then reports it is going, but it is binding. I tell him to swap the C Solenoid from his original box into the US box, so that it will have the same solenoid as the TCU. Sadly he advises that the garage has trashed his old box, every thing is gone. He now has only one option to fix the problem that is to obtain a VTD normally open C Solenoid. He starts a Thread seeking one.

Trevor tells him that he will get him one. Buys it, ready to post it to him, then finds that he has been fraternising with me. He reneges on the deal, brings his thread to this thread just confuse every body so they have no idea what he is talking about.

That is the state of play at the moment, Its up to him to play the part of a real Network member and assist him, Trevor’s next move.

Harvey.