replaced my antenna mast

[Landshark]

used this - should probably be added to the HOW-TO section. it was a nice step-by-step procedure - good job! (Doug?)

http://www.capital-internet.net/%7Ed...na/antenna.htm

a couple notes - i had a ground wire that needed to be unfastened, also (obvious), that i didn't see in the pics. also, my antenna cable was fastened to the motor with a rubber strap, not a zip tie - must be late model improvements!


also, be sure to orient the top (metal) part of the mast guide in the plastic mast guide correctly - on the part that sticks through the outside of the car there is a tab that the outer plastic part slides onto. left me scratching my head for a couple minutes.