Wow JDM parts In Christmas comes early

Originally posted by Motorsport-SVX


Mike whats the scoop on the mirrors ? What was the install like?
Im going to try an install this week anyway....
That and the rear panel maybe tomorrow \
Ill take pics of course....

Dayle-

The mirrors are quite easy to install. You will notice that there are two extra wires coming out of each mirror, and there are two extra pins on the JDM mirror switch. All you have to do is run your own wires from the switch to the mirrors. I spliced into the mirror wires on the mirror end and soldered the wires onto the switch on the switch end.

The mirrors work on a reverse polarity circuit. When the polarity is +/- the mirrors fold in. When the polarity is -/+ the mirrors fold back out.

The mirrors have built in relays that prevent the motors from burning up if you hold down the button too long. This would also make it easy to wire it to an aftermarket security system or whatever.

Mike