SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
|
#1
|
||||
|
||||
Door cards disintergrating
SVX 95 -117000k
I'm onto my third rebuild of my door cards. The pink plastic moulded stuff is gradually fracturing all over. The inner handle just pulls out. Has anyone come across a permanent fix? I fixed the nacelle under the steering wheel with fibre-glass and gel-coat and it seems to be holding up OK, but I havn't had it off yet;-) I'm thinking this time of coating the whole thing with gel coat, but rebuilding the screw attachments is a long and painstaking job, and I inevitable get 1-2 mounting posts off center! Dont suppose anyone out there has made a fibreglass mould? I guess these days they could be 3D printed? Dont suppose new cards are available? Any suggestions appreciated regards Don McAlpine Otaki New Zealand |
#2
|
||||
|
||||
Re: Door cards disintergrating
Pink Plastic door cards?
__________________
Peter ART Cryogenic/Slotted Rotors, Stainless Steel Brake Lines, PWR Radiator, Tranny cooler, Stebro, Earthworm's Poly Differential/front & rear swaybar bushings, Koni Inserts and Mychailo SVX Sport Springs all 4 corners, Indigo Blue paint. Liquid Silver Wheels. |
#3
|
|||
|
|||
Re: Door cards disintergrating
OK. I Googled "door cards" called door panels in this hemisphere. The rest I simply don't comprehend.
__________________
Good s**t happened. 69 was worth the wait. '92 stock semi-pristine ebony - 160K '96 Grand Caravan - 240K '01 Miata SE - 79K '07 Chrysler Pacifica - 60k - future money pit. |
#4
|
||||
|
||||
Re: Door cards disintergrating
I have never seen a door card disintegrate, my 92, 95 and the 1 parts car all had decent door cards (except for the dirty arm rests). Are you in very warm climate?
__________________
1992 LSL ebony pearl 170k - Thank you Ron Mummert Reading Box of Wine Car ----------------------------------- 1992 SVX LSL 5-Speed Sold at 180K 2019 1995 SVX Lsi Polo Sold at 118K 2007 |
#5
|
||||
|
||||
Re: Door cards disintergrating
I usually alternate between door cards and door panels (usually I say door cards to mess with older people ). You'd probably need a fairly large 3D printer to print an entire door card/panel, but I've thought about trying to print parts before.
|
#6
|
||||
|
||||
Re: Door cards disintergrating
Don,
never had any issues with my cards/panels - maybe your plastic liners are not sealed correctly - letting moisture in ?
__________________
1995 LSI, Added the following - Gear Firm-Up unit (that I sell) together with Power TCU ROM & Power switch, K&N air filter, SVX side badges (USA type), Rear Deck Blower (JDM type), Side front markers (USA type), Side rear markers (USA type), Middle rear light (USA type), USA OEM Fog Lights fitted into NZ OEM glass (NZ OEM headlights had only reflectors fitted) Full set of yellow (90SH) Polish bushes includes 15 min mod, R1 Concepts drilled/slotted/gold finish rotors & Red covered braided brake lines (both from Dayle at Motorsport warehouse), EBC Redstuff brake pads. Full SVX bra (only used for shows). Koni adjustable inserts fitted inside OEM strut body, Zoom lowering springs (2" lower), OEM headlight washers fitted. |
|
|