need specification on the eg33

[shark_22]

Hi, somebody can tell me if the ej207 or ej257 oem rod are stronger than the eg33 oem rod?

what is the size of the oem oil pump of the eg33? 11mm ou 12mm?
Are you using sti oil pump(they have the 11 and 12mm too)

thanks!

[oab_au]

Originally Posted by shark_22

Hi, somebody can tell me if the ej207 or ej257 oem rod are stronger than the eg33 oem rod?

what is the size of the oem oil pump of the eg33? 11mm ou 12mm?
Are you using sti oil pump(they have the 11 and 12mm too)

thanks!

Don't know about the ej207?, but the 2.5 rod is longer with a smaller bigend. The eg33 uses a 12mm wide pump.

Harvey.

[shark_22]

Originally Posted by oab_au

Don't know about the ej207?, but the 2.5 rod is longer with a smaller bigend. The eg33 uses a 12mm wide pump.

Harvey.

ok, the ej207 and ej257 have the same length of rod
do you know the length of the eg33 rod?

Im not sure if oem vs oem, the ej257 have stronger rod vs eg33

[torxxx]

the eg33 is all EJ22 internals

EJ25 is a stroker version of the EJ22 so pistons/rods are the main difference

[shark_22]

I just confirm what Im saying, the rod of the ej207 and ej257 are the same length of the eg33 rod(130,5mm) and journal look like the same

But If i want to run the ej25 piston yeah I have to sleeve it but this is not what I want.

the only thing im not sure is on a n/a setup, the sti rod is that much stronger than the eg33 oem?

[shark_22]

somebody know if the oem sti rod is that much stronger than the eg33 oem rod?