SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
|
#1
|
||||
|
||||
Darned ball joint...
Okay, need a little help here guys... I'm working on a front wheel bearing replacement at the moment and got a little problem; I'll be damned if I can get the lower ball joint freed up. Anyone any pointers or advice on how to do it??
I'd detach it from the A-Arm but unfortunately I can only free up 2 of the three nuts... the third one appears to be slightly bent behind the hole so I can't get any tools up in there to free that one. Anyone offer any pearls of wisdom on this one? |
#2
|
||||
|
||||
Wow, it's been too long since I changed my balljoint. Which bolt are you having trouble with?
Reference link I don't remember having to remove that many bolts though. Heat and/or penetrating fluid can be your friend.
__________________
David B. SVXipedia @ SVX-IW.COM -- SVX Information Warehouse 2.0 coming...eventually! Ebony 1992 SVX LS-L 5 spd Koni/GC Stebro 187k miles RIP (Rust In Pieces) 1993 SVX 5 spd Koni/GC Stebro Polyurethane bushings still available! |
Thread Tools | |
Display Modes | |
|
|