ABS Unit

[kuritsa]

I have discovered a small leak somewhere from the abs unit. I shall be removing the unit shortly. I post here to ask if there are any o rings or seals which could possibly be the cause. It isn't causing concern yet as it's only a weep and brake performance us normal with no codes or flashing lights but I would like to know if there is a procedure for taking it apart. I have searched here but there doesn't seem to be much about it. Thanks in advance.

[92snowmachine]

i rebuilt one on an outback once. it was nothing but a bunch of o-rings. they tend to leak from the little round plugs on the side of the unit. on the outback you push the plug down to access a snap ring then a spring will push it out. replace the o-ring and put it back. i would take it apart as little as possible.