Quote:
Originally posted by ww111
Calibrated wrist? 
6.5 isn't much... and the wrench is only about 3" long so I wans't too worried about overtightening. It gets tight quick. in about an 1/8th of a turn or less. Plus there's a range of adjustment. I just wanted to make sure I wasn't going to let that pin fall off.
Collins
|
That is the right way to adjust the band, for a backyard job.
You would have to loosen the adjuster about 5/6 turns to have it drop the link out of the band.
Turn the adjuster in till it tightens and back it off 3 turns. This sets the right amount of clearance to suit the timing of the TCU. Too much clearance it will slip, too little clearance it will bind, as you have found.
All the best, your going the right way.
Harvey.
