|
Re: Help to coneck Speed senor. (need wiring diagram)
Quote:
Originally Posted by b3lha
Install the SVX 3-wire speed sensor in the 5MT gearbox.
pin 1 (YR) is the signal wire.
pin 2 (BW) connects to ground
pin 3 (RW) connects to 12v
Remove the YR wire from pin C6 of the TCU plug and connect it to the signal wire of the speed sensor.
|
Ok thanks alot.  I sit and wait for the answere on the speed senor.
And i hope i get it fast. But thanks fore helping me. 
__________________
Alexander (Norway)
My subarus:
1992 Svx LSI 5-MT(3.54)
1998 Legacy BG 2.5L GX
|