Thread: Tranny
View Single Post
  #4  
Old 07-18-2011, 05:29 PM
processengr's Avatar
processengr processengr is offline
Registered User
Subaru Silver Contributor
 
Join Date: Feb 2007
Location: Conn.
Posts: 767
Registered SVX
Re: Tranny

I have two of these, one in the 92 Black over Silver, and one in the Ebony 92 with 4.44. I didn't buy the TCU exchange though, I bought just the ROM, and installed myself into spare TCU.
The one in the stock Silver works well, but if you look at the extended shift points published on ECUtunes website, you will see that it is a subtle difference /change from stock.. My main interest was in the increased pressure maps, to reduce slippage in the higher gears.The reduction of threshold temperature for ATF warning lamp is also a big plus. I have had trouble with the ROM installation in the 4.44 geared Ebony, that I have not sorted out yet. It appears it is not seeing vss1. Since I installed the ROM myself, it is probably something I did. I will be swapping the stock TCU back into it, then examine the PCB for soldering issues, as well as the connectors, etc.
__________________
Cheers! Gordon
1997 Ebony #308 113k "The Black Diva"SOLD
1992 Black over Liquid Silver 152k SOLD
1992 Ebony 251k 444 SOLD
1999 Silver SLK230 134k SOLD
1997 Green Outback 137k SOLD
2013 Honda Accord I4 SOLD
2015 Subaru Crosstrek 30k
2018 Tesla M3 30k

Last edited by processengr; 07-18-2011 at 05:33 PM. Reason: grammer
Reply With Quote