|
Re: Performance 4EAT
I finally received the parts. The trans shop that ordered them for me were totally dragging their feet. I put all the clutches together last night, everything went together fine and the clearances were ok.
Here are the part numbers of what I ordered. My trans is a mismash of different parts so you'll probably need things different... But it gives you an idea. I did need the 3.4mm high clutch pressure plate, and even still clearance was tight.
(6) Raybestos R573765
(4) Raybestos R573790
(6) Raybestos R573780
(6) Alto 075703K152
(1) Alto 075760-340
(2) Alto 075707-225
(7) Alto 075700A
(2) Alto 075950
(3) Alto 075708
I have attached a pic of the 1.75" brake band (the new one is on the right) and of the Kolene steels and Raybestos green kevlar frictions. The Alto Red Eagle frictions were not available.
|