Quote:
|
Originally Posted by ssnsltd
If you don't drill a 1/8" or larger hole just PAST the end of the crack it will keep coming back. The expanding plastic and vibration keep it alive. Also drilling several holes through the length of the crack gives the epoxy a better purchase.
Make sure you use course grit sand paper and brake parts cleaner or equiv to prep the surface.
|
And be sure disconnect the radiator and thoroughly flush it before refilling it with water/antifreeze. You don't want any plastic particles floating around in your coolant channels to clog things up.
__________________
Mychailo
:: 2006 Silver Mitsubishi Evolution 9, E85, 34 psi peak, 425wtq/505whp DJ ::
1995 Laguna Blue SVX L AWD 5MT (sold)
Visit my locker
SVX Mods: ND iridium spark plugs, Impreza RS fpr, afr tuned to 13.2:1 using a custom MAF bypass, custom exhaust, WRX 5MT w/ STi RA 1st-4th gear & stock WRX 5th gear, Exedy 13 lb flywheel & Sport Clutch, STi Group N tranny & engine mounts, urethane spacers in rear subframe, rear diff mounts, and pitch stopper, SVX Sport Strut Springs (185f/150r), custom 19 mm rear swaybar, urethane swaybar mounts, Rota Torque 17x8", 225/45-17 Proxes 4 tires, Axxis Deluxe Plus organic brake pads.
|