[b3lha]

Originally Posted by SVXdc

Here's another drawing with the pin numbers (lower connector with 9 pins):
<- This one.

View is looking at the contact pins (wires pointing away from you).

This is looking at the contact pins of the female end (car). If you look into the male end (audio harness) the numbers are obviously reversed:

43_21
98765

Just so you know, I did swap in the red and black wires on the first one I made. I didn't do it for the second one because I didn't want to the complicate the HOWTO.

These things are really easy to make. It takes me about two hours now I know how to do it.