Quote:
Originally Posted by blueji
OK Guy's.....really need help here,
I'm gona start over again...got myself a trusty meter and checked the resistor and it measures 12 ohm...sorry for leading folk astray! The symptom when driving:- the gear change, mostly smooth then the odd light thump into gear, no power light on kick down but seems to go through the gears ok, no engine breaking when put into 3rd from D (revs fall away to idle ), the power light lights up on start up and blinks 16 times.....when I try to pull a code going through the procedure, the power light just stays lit and does not flash.
I have a few ideas and could go 50/50, but I would like to ask the audience first....pleeeeeease.
John  |
Hi John, these are the symptoms of an open circuit in the resistor circuit. May be the wiring that was connected for the shift kit, that you removed, is still open somewhere at the resistor.
The light staying on? no idea. But I would check the wiring around the resistor, as it is open somewhere.
The solenoid buzzing is mainly the A, thats why it reduces as you push the throttle. They buzz because there is no oil flow through them.
Harvey.