[glide]

I have a Kenwood DD deck, but it isn't the initial one I wanted.
First thing to check is if you have enough depth for that unit. The first deck I wanted wouldn't fit depth wise. Crutchfield would be able to answer that.
Also, you need to check how far out the face slides, crutchfield might be able to tell you that as well.
Then measure the distance from the lip of the cover to the face of your existing stereo, straight back in and see if you have enough clearence. It's not exact, but it will be close.
Also, you will probably have to remove the black molding that goes on the top, back of the radio cover, just like in the picture the one guy posted. Sorry, I don't remember your handle off hand.

Good luck.