|
Brass (double-male) barb connector.. .
Can I use a BRASS double-male barb connector to connect ends of AT fluid lines. Is it compatible with the ATF? I previously hooked two AT lines together (between cooler and campaign filter) with a scrap aluminum tube with lip on one end only .. IT CAME OFF ABOUT 6 MONTHS AGO.. SPILLING ATF EVERYWHERE ON MY WAY HOME FROM WORK!  Ha!
Thanks.. 
__________________
Jim
1995 Laguna Blue SVX AWD L - 240K (daily driver) - "ReBuILT" used engine at 236K miles (6/13)
2013 Veloster Red - Driver Now??Dropsprings [1/2" rear, 1" front] with Koni Strut Inserts> Magnaflow Exhaust System> ECUTune Stage 1av1 Upgrade (from 1v4)> ECUTune TCU MOD> Aluminum Crankshaft Pulley> Stainless Brake Lines> Phenolic Spacers> Perforated Brake Rotors (dint like, OEM now)> SmallCar Shift Kit (resting since TCU MOD)> 7-Position Ground System> High-Pressure Fuel Pressure Regulator (resting)> ATF Cooler & Campaign Filter> Yellow Polish Polyurethane Bushings> Pioneer Double-DIN Stereo with JL AUDIO Speakers> Driveshaft Rebuilt with C-Clip U-Joints> 15 Min MOD> 20 Min MOD .. . (2011)
 Valentine One Radar Detector with Remote Display - ucan'tseeme! 
Last edited by James Scott; 07-01-2011 at 06:57 PM.
|