http://www.ebay.com/sch/m.html?_odkw...lange&_sacat=0
I don't know but here is some flanges ask on the network what ones will fit
I would find a savaged svx and cut them of the pipe and weld them in. Like I am going to do with my clogged converters see you have posted on my thread on exhaust problems
I would not recommend a aftermarket exhaust because most people are not happy with them. so stay factory, aftermarkets get expensive with buying the parts and then labor charge for bending pipe excreta,
but I am frustrated with Subaru for offering one pre-cat side and not the other 44107PA320 you can still get and 44107PA330 is discontinued b.s
then your talking 1400 dollars if they were available but It would be a price I would be willing to pay.
P.S I bought the o.e.m exhaust gasket that has 2 holes it goes between the pre-cats and the front of the main converter and it still leaks. I bought a graphite sheet to make my own here is a link to it.
my friend told me that the o.e.m exhaust gasket holes were too large and it was a design flaw so I found this to make my own
this is for the 96-97 svx's. The 92-94 have donut gasket in front and back
not sure about the 95s
http://www.ebay.com/itm/Graphite-Fle...a780d3&vxp=mtr