Quote:
Originally Posted by kis86
We have a 92 AWD that has had no AWD since we bought it. Here's what we know so far:
1. Transmission threw a code 24, Duty solenoid C.
2. Brought it to a tranny shop, had the duty solenoid C replaced with a new one.
3. Also replaced the clutch plates with new ones just in case.
4. Transmission shop found something was sheared off (drum assembly? something like that)...replaced now.
5. AWD STILL NOT WORKING! 
6. Cleared all codes, and left battery unplugged overnight. No codes now.
7. Drove car around for a half hour or so.
7. Checked codes on TCU: Code 24 Duty Solenoid C showed up again.
Anyone have any ideas on what to do from here? We're not sure what else to check, and troubleshooting at the dealer or anywhere else is sooo spendy 
Thanks!
Staci |
Hi Staci,
Special compliments and thanks for the explicit tabulated history, which tells the full story.
It could be that there are debris circulating in the fluid and something has again jammed the C solenoid. The time factor tends to support such a theory/posssibilty.
However faulty workmanship in connection with the overall work done can not be ruled out.
