|
About speedometer
Phil
You are maybe right in your remark about speed sensors.
The reason to that I say it is SS1 is that I have made a test by
disconect B14 and then connected a testgenerator adjusted to
about 1 volt sinus signal with 500 Hz to the white wire wich comes from SS1. And with ignition on.
The result was the speedometer showed rufly 40 km/h. and the
distance counter was also moving.
If I remember right the same was done on the wire for SS2.
The reason to the test was to find a way for signal when I replace
the AT for a manual 5 speed
I have started to convert to 5 speed manual.
The AT does not shift up.
Regards
Lars
__________________
lars s
|