|
I checked out duty solenoid "C" at the TCU connector and the voltages are fine. It has 11.6Volts in P and N. At rest in R,D,3,2,1 it is .37Volts to 3.7Volts and it oscillates on the digital volt meter. When driving at 5 mph it is about 5V and in a tight turn, left or right about 5V also. In a fast stomp to the floor I was not sure, as it was beeping and it is hard to keep track of the decimal point on the digital. So I got the analog meter and the voltage goes to ZERO when I stomp on the accelerator from rest. The analog also shows and the oscillation when at rest and in gear.
The resistance is 14.4 Ohms.
Would you agree that this means the transfer passageways are plugged up?
|