View Single Post
  #5  
Old 08-18-2012, 11:08 AM
longassname's Avatar
longassname longassname is offline
Just some dude.
 
Join Date: Sep 2002
Location: Miami, FL
Posts: 3,986
Significant Technical Input
Re: JDM driveline swap

The vtd transmission uses different rear mounts than the US. I don't speak japanese but the parts are the same as for the australian or uk transmissions and they fortuntely speak english. My transmission had one good rear mount on it which you will see as very shiny because I just sprayed it with mercury phantom black spray paint. I had an Australian customer of mind order me the other mount and the stopper that goes on the cross member from his local dealership for me. The crossmember is the same.

the mount he got me: 41022pa120
http://www.ecutune.com/posts/jdm/DSC_9063.JPG

the stopper that goes on the cross member:41022pa130
http://www.ecutune.com/posts/jdm/DSC_9064.JPG

the mounts installed on the transmission and the stopper installed on the crossmember:
http://www.ecutune.com/posts/jdm/DSC_9071.JPG

If I remember correctly the other rear mount was part number 41022pa110

Last edited by longassname; 08-18-2012 at 11:11 AM.
Reply With Quote