|
I agree
I agree with shotgunslade. A flow control valve is the most simple solution. Using a swirl pot and/or electric water pump would also help. I haven't seen any real good swirl pots out there. You're probably better off making one custom anyway to get the best fit and performance. A poorly designed one can make things worse. I'll try to post pics/diagrams later.
I prefer the Davies Craig electric water pump to others. It has a good impeller design and its temperature controller only runs the pump as fast as it needs to to keep the temperature you set. It can be used as a total replacement or as a booster.
You could get a nice aftermarket radiator to keep temps down. You could also go all out with stainless steel braided piping and AN fittings.
|