Re: Lock Nut for Tensioner Pulley on Alternator Belt
Quote:
Originally Posted by Tireiron
Loosen the nut on the pulley first, then adjust the tension with the long bolt, then tighten the nut on the pulley to lock it into place. The pulley will NEVER move if the nut on it is tightened down.
|
Thanks for this. I know the process of tightening it but something is definitely not right with the long bolt. The gap that you can see in the pictures gets larger and larger as I tighten the long bolt.
I am either missing a washer or I need to move the sliding washer. This is where I need help.
http://dl.dropbox.com/u/92825687/20130314_193641.jpg
http://dl.dropbox.com/u/92825687/20130314_193657.jpg
__________________
__________________
-Dan
1996 Polo Green SVX L - 85k
1992 Ebony SVX LS-L - 193k (parts)
|