|
I know what manarus is talking about but That is not the issue. Thanks trevor for the info, this tell me that when the Sol C is lacking power, it will be stuck in the full open position and will keep it FWD. now that I know that, there are 2 real world posibilities. One, the wires are pinches somewhere and this is not allowing the solnoid to close and release the rear wheels. OR the solenoid is fried and it is stuck open. SO, all I need is a pinout for the sol C wire outside of the trans that I can ge a voltage reading from. If there is power on the outside of the case, I will have to operate anyway. If not, I do not have to waste 7 qt's of good atf and I need to find out where my electric failure is happening. I will take a look at my service cd's and see what I can find with the wiring. Anyone with access to these files and has the ability to post them... please do
Tom
|