View Single Post
  #4  
Old 01-17-2007, 06:27 AM
huck369's Avatar
huck369 huck369 is offline
Inventor of the 5-speed swap
 
Join Date: May 2001
Location: Somerset, KY
Posts: 5,605
Significant Technical Input Registered SVX
Quote:
Originally Posted by michael
If I knew where it was i'd offer some advise. Mabey a little silicone would do it and it cleans up well when you have to. I wouldn't want to drive around with any open holes given the messy winters up here. KY might not have constant road salt like we do

We use salt down here....just that we hardly ever get any snow anymore

And the little hole it covers is open to the bellhousing, kind of under the throttle body on the passenger side....and the inside of the bell housing is open all the way across the bottom, so that little hole up top isn't really saving it from the elements....might even be good for rinsing it out....
__________________
Huck
Subaru Ambassador
92 SVX LS-Tour Magnaflow Exhaust, 5-Spd-AWD
88 XT6 AWD 5-Speed "Bride of FrankenWedge"
15 Impreza Premium Sedan
15 Crosstrek XV 5-Speed
My 5-Speed "How-To" Write-up
1976 Pontiac Firebird Formula
Current Count of Subaru's Owned.... "70"
Reply With Quote