[Kiss Me Deadly]

Problem: oil leak on the top of the motor

Reason (in that case): Oil is coming from ventilation system through PCV valve, then accumulating in the bottom of the intake manifold, then drips from the I.R.I.S. valve shaft when the valve is open.

How to solve: install oil catch tank

What to buy:

• Oil catch tank (like that http://ajs.su/masljanoe-ohlazhdenie/...ltrom-chernyy/)
  
  
  
  Drain plug:
  
  Fittings:
  
  Adapters and PCV:
  
• (If you use 3/8 oil catch tank) 1/2 to 3/8 adapter (x2)
• 1/2' hose (less than 1 meter)
• PCV valve - good time to replace the old one.

Instruction:
1. Remove intake manifold
2. Remove old PCV valve
3. Clean intake manifold inside to remove all oil from the bottom
4. Clean the top of the motor
5. Install new PCV valve
6. Measure hoses lengh to cut
7. Install oil catch tank
8. Install hoses to PCV valve and to crank case out pipe

9. Install intake manifold
10. Plug hoses (or hoses and adapters) to oil catch tank

11. Enjoy!