|
Maybe I didn't do the code clearing right but I put the two blue wires in the slots to the top left in the small black plug and started the car and then turned it off and removed the blue wires and without even starting the car I checked the codes and they were still the same as before.. I didn't see how it could have stored those same codes if the engine hadn't even been started. Wouldn't it work to disconnect the battery to clear the codes. I don't mind that the radio and clock looses their stored memories, that is easy to fix.. I need to take the battery out anyway to clean the little ground wire that is attached kind of under the battery.. Thanks for your replies.. Vernon
|