|
Re: panless model?
Quote:
Originally posted by oab_au
My car is a 95 LSi Australian delivered model and as far as I can tell, it never did have the back part of the cover on it.
It was owned by Subaru Australia before I got it. So I don't know if it was taken off by them, or if all the Aust models did not have the rear section.
Anybody else notice that their model, does not have it.?
Harvey. 
|
I bought my '95 L used. The front section of the belly pan looks like its designed to mate with a rear section, but my car does not have a rear section. I haven't looked for mounting holes on the car for a rear section. I'll have to do that. Do you see any mounting holes for a rear section?
__________________
Mychailo
:: 2006 Silver Mitsubishi Evolution 9, E85, 34 psi peak, 425wtq/505whp DJ ::
1995 Laguna Blue SVX L AWD 5MT (sold)
Visit my locker
SVX Mods: ND iridium spark plugs, Impreza RS fpr, afr tuned to 13.2:1 using a custom MAF bypass, custom exhaust, WRX 5MT w/ STi RA 1st-4th gear & stock WRX 5th gear, Exedy 13 lb flywheel & Sport Clutch, STi Group N tranny & engine mounts, urethane spacers in rear subframe, rear diff mounts, and pitch stopper, SVX Sport Strut Springs (185f/150r), custom 19 mm rear swaybar, urethane swaybar mounts, Rota Torque 17x8", 225/45-17 Proxes 4 tires, Axxis Deluxe Plus organic brake pads.
|