|
More lift.?
It would be easier to cut the edge of the lifter well away, than radius the cam.
You can get more lift by reducing the base circle of the cam profile. The lifter will pump up about 0.75mm, you could rely on at least, 0.50mm more. But I don't think the motor could use more that 9mm.
Harvey. 
__________________
One Arm Bloke.
Tell it like it is!
95 Lsi. Bordeaux Pearl, Aust. RHD.149,000Kls Subaru BBS wheels.
97 Liberty GX Auto sedan. 320,000Kls.
04 Liberty 30R Auto Premium. 92.000kls.
|