Re: removal front bumper incl steel beam
There are:
4 bolts that hold the beam to the car, located under the hood at each frame rail (Battery needs to come out)
There's one bolt in the radiator support...Accesable from the lower opening in the bumper cover
there are two bolts at the fenders...you need to move the plastic fender liner out of the way, or remove it completely to access the bolts, which go UP through the cover into the fender *Theese are a ***** to remove*
there's also two fasteners that ook lke realy flat 17mm bolts...One at each end of the bottom of the bumper cover. There are also sevral across the front (Pay no mind to the 10 or so screws holding the plastic curb guard to the bumper..there should nly be 4 or 5 bolts that go through the bumper and undertray and into the rad support)
__________________
R.I.P Cool Signature. You're gone but not forgotten. I mean, sure, I kindof don't remember some of the finer details..but I remember you were funny, and at one point you said spaghetti in Dutch....but definantly not forgotten
|