View Single Post
  #27  
Old 08-05-2006, 11:14 PM
svxcess's Avatar
svxcess svxcess is offline
Super Moderator
Alcyone Gold Contributor
 
Join Date: Feb 2001
Location: Westminster, MD
Posts: 6,747
Significant Technical Input Registered SVX Classic SVX
I am still trying to obtain the OZ Racing Palladio wheels for my 96 SVX. Tire Rack will not sell them to me because they say they don't fit.

I asked them if they fit the 2006 STi (since it uses the same bolt pattern and centerbore). Once again they said "no" because the shape of the spokes will not clear the (larger) caliper. The STi calipers are much bigger than our stock ones.

I want to get back to them again with specific measurements. So I need to know the following:

What is the measurement from the mounting face of the rotor hub (front and rear)
AND the very edge of the face of the caliper?

I need to know just how much space I would need so that the caliper would not contact the spokes when the wheel is mounted.

If I can get this measurement, I can probably have them figure out how close it is. I could then either grind off part of the caliper casting or just add a small spacer between the rotor and the wheel.
.
__________________
.
Subaru Ambassador

1996 Polo Green LSi #216..138,100 miles...SOLD

JFICX8659TH100216.....Date of Manufacture: November 16, 1995.....
Fuji Heavy Industries..Ōta North Plant....Ōta City,. Gunma Prefecture, Japan

In-Service Date: January 2, 1997



"The Pristine Green Polo Machine”
First Polo Green on the Network
First Clear front turn signals, JDM Alcyone hood emblem, rear panel, and BOXER engine cover on the Network (US) (2000)
First 5000K HID factory fog lights (2007)
First SVX JDM BBS wheels on a USDM SVX (2013)

HID lighting (5000K) for headlight and H3 fog lights, PIAA SuperExtreme 120W high beams, rebuilt EG33 longblock, Cometic head gaskets, Phase II flexplate, AMR aluminum radiator with custom silicone hoses, 160A high-output alternator in aluminum-ceramic coated case, new design alternator wiring upgrade v.4, rare factory headlight protectors, refinished JDM BBS mesh aluminum wheels and custom, polished billet aluminum new hex center caps, LED grille mod, R1 Concepts high-carbon cryo slotted rotors, Akebono ceramic pads, Goodridge S/S braided brake lines, Smallcar Stage 1 shift kit, ThermalTech aluminum/ceramic-coated valve covers, Energy Suspension urethane front & rear swaybar bushings, Bontrager22 rear swaybar with QS Components Chromoly Teflon/Kevlar endlinks, "$15.00/5 minute" suspension mod. Hella Supertone horns, Custom stainless steel exhaust system with 2" headpipes, Magnaflow cats, AeroTurbine AR25 resonator /AWD "Bullet" muffler.


R.I.P. 2010 Subaru Outback Limited 2.5 CVT...338,000 miles. Totaled by a 1,300 lb. COW March 4, 2016

2014 Hyundai Avante Limited ...178,000 miles. Actually quieter and smoother than the Outback

2007 Mazda Miata MX-5 PRHT...102,000 miles.
Plenty of parts, service and windshields.


4th Registered Network member —2/21/2001

My NEW locker..I...My Email..I..Wikipedia/SVX .

.

Last edited by svxcess; 08-06-2006 at 04:53 PM.
Reply With Quote